Skip to main content

Posts

Showing posts from 2015
Due to the current Uk flooding crisis, we are testing our pontoon, walking board & flood door prototypes (see early pics) .

We are in contact with various orgs, aiming to supply our prototypes for further testing.

Thanks to Alan who provided at low cost, 9000 new Hilti collated screws to cabinz project, We'll be using these on the flood defences

Pontoons


Thanks again to Phil for letting us use his lake & field for testing.

Initial testing of door window cut outs pontoons is promising.

The seams, rigidisation  & wood effect on grp surface appear to provide a slip resistant surface when wet.

Each pontoon takes approx. 100kg of weight, 135mm thick ( 3 doors ) & aprx 1sq m. they will likey have metalclad beam strengthening on sides . Explanantion here http://www.instructables.com/id/Clad-Composite-Beam-From-Waste/

They will be likley be bolted together with 20-24mm metal bolts,  with tyre rubber  / plastic off cut edging  between them to stop wear due to  movement in w…
Cabinz delivered 1.25 tonnes of a4 / a3 paper / plastic folders to 4 scrap scheme charities. Seperately 1/2 tonne of door & panel offcuts were delivered to them.

They were Merseyside Play Action Council Scrapstore  
Play Resource Centre Scrapstore
sefton play council
wirral play council

The paper was doanted to us by Cheshire West & Chester Council  who moved a print dept.


We got a major boost for the Cabinz project & our supporters.

Out of a friendly scrap yard, came over 2 tonnes of new, (but with light surface rust) nuts, bolts, washers & mounting plates .We now have enough bolts & screws to make a village or a bridge !. Some monster bolts were 24mm diameter.

If bought new, they would cost £15-£20,000!

The smaller ones are for joining panels. Large 24mm bolts can be used to support & form adjustable footings under small outbuildings.



24mm dia m24 bolts


Basic strength test for a 25mm x 48mm length of "metalclad" (metal clad is my invention of a door side off cut of grp skin upv core glued & screwed inside drywall lining steel'

This sample had grp on 3 sides & drywall channel on 3 sides . Apollo adhesives glue was used with slant drilled drywall screws (42mm.) As it was the dimple sided c-stud, I think this did not glue well. Flat sided stell would glue better imo

I weigh 16 stone (101kg) . Yes, the beam survived!

We will be doing more elaborate strength  / destruction tests in the new yr with thicker & longer samples.









Wood Framed Hexayurt Inspired Featherweight Panel (3.5-5kg) 

I did a bit of research on the excellent HEXAYURT shelter. A masterpiece of simplicity from  Vinay Gupta the Inventor  . He has some very informative videos. on a wide range of subjects.

Inspired by a posive email reply from Vinay, I thought I would have a go at a featherweight panel using other offcuts from the door factory (Rough prototype 1 in pic ).

Off cuts are from the inside of a specialist panel.  Weight is 3.5-5kg, as panel  / mdf  width varies


 I did a 1 yr outside test where panel was exposed to all weathers . Aparet from a few mm swelling of mdf edge , the panel was fine. A edge coating of paint might stop this.

The outer frame is 30mm thick & 1800mm +/-  high . Composite with outer skin of plastic both sides, then 6mm or 9mm mdf, polystrene or rigid foam core.

The cross bracing  is single sking plastic approx 3mm, a door side off cut, strong in tension.

I have put 3 screws in corners, but would like use sm…
Basic tent peg test from grp / plastic composite door side off cut.

Point made with chop saw with wood blade ( grp - wear mask)

Bashed in with normal hammer ok, solid top survived well with no splits, few dents. 

Could have barbs or slit on side added to fix better. \best not to cut grp skin as its composite strength

Needs hole drilled in top to take guy rope .













New panel designs using door off cut "window cut outs". Pics are side & stronger roof.

 All will be clad on sides with drywall stud or tracking steel metalclad (cutaway sides in pic 1.)

Note: finish is a bit rough due to trialling a new 1 part non toxic glue from apollo adhesives

This is working great!  £9 a litre for 12 x 1 ltr box. It is like superglue that foams up a bit to seal.

 Edges may still need a quick finger run of silicone (i've bought a pallet off ebay for 30p a tube in mixed colours)


I have contacted the local coast guard / fire brigade / army /Gov. as they could be used as crawling / walking / floating boards in flooded /boggy / muddy areas.

Pontoons I've designed using panels bolted together or tyres filled with door panels, & extra side / under strenghtening may be needed for buoyancy. 

I will test this in a lake new yr.







Further to the last post on our work with composite door off-cuts. Over the last year, we have experimented with various panel design prototypes in different thickneses & configurations.




Cabinz have been working with a large composite door manufacturer for over a year. 
We have re-used approx, 25-30 tonnes of materials that would have become waste without this service & been land filled, as it could not be recycled, being mixed materials of upvc & grp fibreglass. ( See pic 1) These have been used by folks for uses such as insulation & husky dog kennels.
 We believe we may have invented a new load bearing product, we are calling " METALCLAD"

Door side off cut strips are made of a composite of a solid upvc core with a grp fibreglass skin on 2 or 3 sides. 
In our research,  we have discovered that they fit comfortably within dry wall metal c stud / i-stud & tracking of 48 / 50mm, 92/94mm &  146 / 148mm. We have experimented with various configurations. This may possibly count as a new invention.
There are a few millimetres spare to allow for gluing or siliconing of materials. With a few screws, this forms a very strong beam upright, as the …
We've just had our 2nd delivery of Rigid foam & steel sandwich panels. These will make prototype, modular out buildings.

If a low income family or small business has a small project like a summer house or garage office. Contact us and we may be able to supply them at low cost .  











A new community group "Woodwork to Wellness" is opening Sept. 2015 in Saltney near Chester.  It is located next to Saltney High st, behind the old Barlays bank building (see pic) 

It is run by Graham who used to run the successful 'Men in Sheds ' Cheshire

WIth a fully kitted out wood work shop in the rear, it will facilitate & teach wood skills to a wider selection of society than 'Men in Sheds' target group.

This will include military veterans & womens' education

The Cabinz project has sold shelving & insualted panels for their cafe (see pics) at low cost





We are selling 12 tonnes of Sapele Hardwood & soft wood from a closed conservatory business in Chester. Timber is cut into conservatory pieces up to 3 metres long. 

We also have new dark brown guttering & clips

Prices are £1.50 to £3.5 a metre

Contact on cabinznet@gmail.com or 07432315470 to arrange to view or buy

See Pics below